Skip to content

Clearance Delivery

Every IFR departure in the MidCarib FIR is given the same clearance format, whichever airport it leaves from. The clearance is issued by Clearance where it is staffed, otherwise by the position providing it top-down (see Top-Down Coverage).

Initial Altitude

All IFR departures climb initially to 7,000 ft, with or without a SID. The transition altitude is 17,000 ft throughout both FIRs, so the initial climb is always given as an altitude.

The vSID plugin in the sector files suggests 7,000 ft for every SID, so the tag will normally already show it.

Choosing the Departure

  1. Check the runway in use (see Runway Selection).
  2. If the airport has a SID for that runway, choose the one that ends at the first point of the flight plan route. Use the designator on the current AIP chart.
  3. If there is no SID, or none suits the route, clear the aircraft to climb straight ahead after departure, or give it a heading.

There are SIDs from both runway directions at MTPP, MDSD, MDPC, MDST, MDPP and MDLR, and from runway 05 at MTCH. There are none from MTCH runway 23, nor at MDJB, MDCY, MDSI, MDBH or MDAB.

Clearance Formats

The clearances below match the aliases in the sector files. A departure frequency is not given.

With a SID

Alias: .clr

Cleared to [destination], [SID] departure, climb altitude 7,000 ft, squawk [code].

Example, from Punta Cana runway 08:

DAL1840, cleared to Kennedy, CHUMA 2W departure, climb altitude 7,000 ft, squawk 4001.

Without a SID

Alias: .clrhdg

Cleared to [destination], after departure runway [runway] climb straight ahead altitude 7,000 ft, squawk [code].

Example, from Samaná El Catey runway 07:

N123AB, cleared to Providenciales, after departure runway 07 climb straight ahead altitude 7,000 ft, squawk 4101.

With a Heading

Alias: .clrvec. Use this where a heading after departure is needed instead of runway heading, for example to keep a departure clear of other traffic.

Cleared to [destination], after departure runway [runway] fly heading [heading], climb altitude 7,000 ft, squawk [code].

Readback

When the readback is correct, reply with .rbc:

Readback correct, report ready.

Squawk Codes

EuroScope assigns a code from the range of the position you are logged in on.

Positions Code range
Port-au-Prince FIR (MTEG, MTPP, MTCH) 5400–5477
Punta Cana (MDPC) 4001–4077
Santo Domingo FIR and all other Dominican airports 4101–4177